Pre-Galvanised
TS 822 EN 10143. Both surfaces of the steel sheet are coated with a zinc layer by a hot-dip process. Coating thickness is 15–20 microns.
Hot-Dip Galvanised
TS EN ISO 1461. Steel is protected against corrosion by immersion in a molten zinc bath. Process temperature is 450–490 °C.
Electrostatic Powder Coating
Polymer powders are electrostatically charged, applied to the part and then oven-cured.
Stainless Steel
An iron-carbon alloy containing a minimum of 10.5% chromium. The most common austenitic grades are 304 and 316; it offers high corrosion resistance.
Electro-Galvanised
TS 149 (DIN 50976). Applied after fabrication is complete. Recommended for dry environments; coating thickness is 8–12 microns.
RAL colour chart
Electrostatic powder coating can be applied in any shade of the RAL Classic chart. Simply state the RAL code in your order. Click a code to copy it to the clipboard.
Colours may appear different depending on screen and print conditions; use a physical RAL chart for the final selection.